How to Build a Custom Stunt ScooterUpdated 20 hours ago

Want a one-of-a-kind setup that fits your style perfectly? Building your own stunt scooter is the way to go 🔧🛴 Here’s exactly how to do it, step by step.

🧰 What You’ll Need (Main Parts)

A full custom scooter includes these components:

• 🛞 Wheels (usually 100–125 mm)

• 🛴 Deck

• 🪛 Fork (compatible with your compression type)

• 🧲 Compression system (SCS, HIC, IHC, ICS, or Mini HIC)

• 🧱 Clamp (double, triple, or SCS)

• 🪵 Handlebars (standard or oversized)

• 🧷 Headset (integrated or non-integrated)

• 🛡️ Grips and grip tape

• 🧵 Axles and spacers

• Optional: bar ends, pegs, fenders or brake

🔍 Compatibility Is Everything

Before you start assembling, make sure:

• Your compression system matches the bar/fork

• Your clamp fits the bar diameter

• Your deck and fork fit the same wheel size

• Your headset type matches your deck (most modern decks are integrated)

💡 Not sure? Check our parts compatibility guide or contact us before ordering.

🔩 Assembly Steps (With Tips)

1. Install the headset into the deck

• Most decks use integrated headsets

• Drop the bearings and cups in place

• Press down evenly until seated

2. Attach the fork

• Slide fork into headset

• Add the top cap and compression bolt

• Tighten until fork spins freely but doesn’t wiggle

3. Install the compression system

• Follow your system’s specific guide (SCS, HIC, IHC, etc.)

• Ensure everything is snug — this is the scooter’s core stability

4. Install the bars and clamp

• Slide bars onto the fork or compression system

• Make sure they’re aligned straight

• Tighten clamp bolts evenly using an X-pattern

5. Mount the wheels

• Insert bearings and spacers if needed

• Align spacers in fork and deck

• Insert axle and tighten (don’t overtighten)

6. Add grips and grip tape

• See our separate install guides for these

• Personalize your setup for style + function

🧠 Pro Tips

• Use threadlocker (Loctite) on clamp/compression bolts if riding hard

• Always test bar alignment before final tightening

• Bounce test your scooter to check if it's “dialed” (no rattles)

📏 Popular Setup Combinations

🛠️ Scooter Building Checklist

✅ Parts are compatible
✅ Compression is secure
✅ Wheels spin freely
✅ Bars are straight
✅ No rattles or wiggles
✅ Griptape is clean and grippy

💬 Want us to double-check your custom build?

We’re happy to review your part list before you order. Just send us your combo!

📧 [email protected]
📞 +45 70 26 79 79 (support in Danish & English)